# TE Preprints

Derniers ajouts:
2014-11-20
18:02
 Frequency-Domain Maximum-Likelihood Estimation of High-Voltage Pulse Transformer Model Parameters / Aguglia, D (CERN) This paper presents an offline frequency-domain nonlinear and stochastic identification method for equivalent model parameter estimation of high-voltage pulse transformers. [...] CERN-OPEN-2014-053. - 2014. - 10 p. Article

2014-11-20
17:58
 Interconnected High-Voltage Pulsed-Power Converters System Design for H− Ion Sources / Aguglia, D (CERN) This paper presents the design and experimental validations of a system of three new high-voltage (HV) pulsedpower converters for the H− sources. [...] CERN-OPEN-2014-052. - 2014. - 7 p. Article

2014-09-23
17:07
 Proof of the nonexistence of a linear solution for the CR2 injection region of the CLIC drive beam / Apsimon, Robert (CERN) ; Esberg, Jakob (CERN) In this paper we present a mathematical proof to show that there exists no linear system of optics which can simultaneously close an orbit bump and correct the dispersion in the CR2 injection region. [...] CERN-OPEN-2014-045 ; CLIC-Note-1035. - 2014. - 13 p. Preprint

2014-09-23
10:33
 Design of the Injection and extraction system and related machine protection for the Clic Damping Rings / Apsimon, Robert (CERN) ; Balhan, Bruno (CERN) ; Barnes, Mike (CERN) ; Borburgh, Jan (CERN) ; Goddard, Brennan (CERN) ; Papaphilippou, Yannis (CERN) ; Uythoven, Jan (CERN) Linear machines such as CLIC have relatively low rates of collision between bunches compared to their circular counterparts. [...] CERN-OPEN-2014-044 ; CLIC-Note-1034. - 2014. - 20 p. Preprint

2014-07-01
12:00
 Proposed Feed Forward Correction for the CLIC Ring-To-Main-Linac Transfer Lines / Apsimon, Robert (CERN) ; Latina, Andrea (CERN) ; Uythoven, Jan (CERN) To achieve the design luminosity for the CLIC main beam an unprecedented degree of machine stability is required. [...] CERN-OPEN-2014-034 ; CLIC-Note-1027. - 2014. - 25 p. Preprint

2013-12-12
11:28
 Sensitivity Analysis for the CLIC Damping Ring Inductive Adder / Holma, Janne (CERN) ; Barnes, Michael (CERN) The CLIC study is exploring the scheme for an electron-positron collider with high luminosity and a nominal centre-of-mass energy of 3 TeV. [...] CERN-OPEN-2013-041 ; CLIC-Note-1021. - 2012. - 5 p. Preprint

2013-10-25
09:58
 Initial measurements on a prototype inductive adder for the CLIC kicker systems / Holma, Janne (CERN) ; Barnes, Mike J (CERN) The CLIC study is exploring the scheme for an electron-positron collider with high luminosity and a nominal centre-of-mass energy of 3 TeV. [...] CERN-OPEN-2013-031 ; CLIC-Note-993. - 2013. - 6 p. Preprint

2013-10-23
11:34
 Preliminary Design of CLIC beam delivery System (CLIC BDS) : Project Breakdown Structure (PBS): 4.1 / Aloev, Alexander (CERN) ; Modena, Michele (CERN) This document describes the preliminary electromagnetic design of the warm magnets required for the CLIC Beam Delivery System.. CERN-OPEN-2013-028 ; CERN-ATS-Note-2012-097 TECH ; CERN-ATS-Note-2012-097 ; CLIC-Note-984. - 2012. - 64 p. Preprint

2013-10-18
16:16
 Design of the anti-solenoid system for the CLIC SiD Experiment / Bartalesi, Antonio (CERN) ; Modena, Michele (CERN) In the CLIC SiD experiment design baseline, with the machine parameter L* set to 3.5 m, the\nfinal focus quadrupole QD0 will be placed inside the detector itself. [...] CERN-OPEN-2013-026 ; CLIC-Note-944. - 2012. - 36 p. Preprint

2013-04-18
16:17
 Nominal trajectory of injected $e^-$ and extracted $e^+$ in the extraction channel of LSS6 / Gyr, Marcel (CERN) In an earlier paper 1) it has been shown that injecting electrons and extracting positrons through the proton extraction channel is not only feasible, but it is also the most attractive of 3 alternative schemes. [...] CERN-SPS-ABT-MG-Int-Note-82-1. - 1982. - 10 p. Preprint