CERN Accelerating science

SPS and CNGS

Letzte Einträge:
2023-06-02
04:05
Temperature Mapping on a Niobium-Coated Copper Superconducting Radio-Frequency Cavity / Bianchi, Antonio (CERN) ; Venturini Delsolaro, Walter (CERN)
Since the late '80s, CERN has pioneered the development of niobium thin film radio-frequency (RF) cavities deposited on copper substrates for several particle accelerator applications. [...]
arXiv:2305.09597.
- 18 p.
Fulltext

Details des Eintrags - Ähnliche Datensätze
2023-05-25
06:16
Commissioning of the LHC Injectors Upgrade fast wire scanners and first experimental results / Di Carlo, S (CERN) ; Emery, J (CERN) ; Andreazza, W (CERN) ; Belohrad, D (CERN) ; Esteban Felipe, J C (CERN) ; Goldblatt, A (CERN) ; Gudkov, D (CERN) ; Guerrero, A (CERN) ; Jackson, S (CERN) ; Lacarrere, G O (CERN) et al.
The LHC Injectors Upgrade (LIU) program included new fast beam wire scanners (BWS) to meet the requirements of the higher brightness and intensity High Luminosity LHC (HL-LHC) beams. Seventeen LIU BWS have been installed during the LHC second long shutdown (LS2) and they are currently used in the daily operations of the LHC injectors. [...]
2023 - 14 p. - Published in : Nucl. Instrum. Methods Phys. Res., A 1053 (2023) 168328

Details des Eintrags - Ähnliche Datensätze
2023-05-25
06:16
Design and Manufacturing of Two High Gradient Quadrupoles Based on Permanent Magnets for the CERN Antiproton Decelerator / Thonet, P A (CERN)
In the frame of the consolidation of the Antiproton Decelerator (AD) Target Area it was decided to replace the two original normal conducting quadrupoles used for the final focusing of the proton beam before the target by two 1.1 m long quadrupoles based on permanent magnet technology. Their gradient is adjustable from 35 to 45 T/m inside an aperture of 60 mm in diameter. [...]
2022 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4003005
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4003005

Details des Eintrags - Ähnliche Datensätze
2023-05-25
06:16
Superconducting Curved Canted–Cosine–Theta (CCT) for the HIE-ISOLDE Recoil Separator Ring at CERN / Kirby, G (CERN) ; Rodin, V (Liverpool U.) ; Kirby, O (Exeter U.) ; Foussat, A (CERN) ; Resta-Lopez, J (Valencia U.) ; Martel, I (Huelva U.) ; Welsch, C (Liverpool U.)
The ISOLDE facility at CERN delivers the largest range of low-energy radioactive beams, exploited by several detector systems to investigate nuclear properties from the stable isotopes to the very exotic systems close to the neutron or proton drip lines. These studies can largely benefit from the use of a high-resolution fragment separator. [...]
2022 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4004105
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4004105

Details des Eintrags - Ähnliche Datensätze
2023-05-25
06:16
Test Result of a Full-Scale Prototype of Beam Separation Dipole Magnet for the High-Luminosity LHC Upgrade / Sugano, M (KEK, Tsukuba) ; Suzuki, K (KEK, Tsukuba) ; Nakamoto, T (KEK, Tsukuba) ; Iida, M (KEK, Tsukuba) ; Ikemoto, Y (KEK, Tsukuba) ; Kawamata, H (KEK, Tsukuba) ; Ogitsu, T (KEK, Tsukuba) ; Ohata, H (KEK, Tsukuba) ; Okada, N (KEK, Tsukuba) ; Okada, R (KEK, Tsukuba) et al.
High Energy Accelerator Research Organization (KEK) is developing Nb-Ti based beam separation dipole (MBXF) for the high-luminosity Large Hadron Collider (HL-LHC) upgrade within the framework of CERN–KEK collaboration. This magnet produces field integral of 35 T•m in a 150 mm bore at 12 kA and 1.9 K. [...]
2022 - 7 p. - Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4003407
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4003407

Details des Eintrags - Ähnliche Datensätze
2023-05-25
06:15
The HL-LHC High Order Correctors Series Production and Powering Tests Status / Statera, M (Milan U.) ; Broggi, F (Milan U.) ; Matteis, E De (Milan U.) ; Imeri, L (Milan U.) ; Leone, A (Milan U.) ; Mariotto, S (Milan U. ; INFN, Milan) ; Paccalini, A (Milan U.) ; Pasini, A (Milan U.) ; Pedrini, D (Milan U.) ; Prioli, M (Milan U.) et al.
INFN is developing at the LASA lab (Milano, Italy) the High Order (HO) corrector magnets for the High Luminosity-LHC (HL-LHC) project, which will equip the new interaction regions. All the HO correctors, from skew quadrupole to dodecapole, are based on a novel superferric design, never used so far in high energy colliders, which allows a relatively simple, modular, and easy way to construct a magnet. [...]
2022 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4004405
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4004405

Details des Eintrags - Ähnliche Datensätze
2023-05-25
06:15
Magnetic Measurements Results and Analysis of the First Batches of Superferric Magnets for the HL-LHC High Order Field Correction / Matteis, E De (LASA, Segrate ; Milan U.) ; Mariotto, S (LASA, Segrate ; Milan U. ; INFN, Milan) ; Broggi, F (LASA, Segrate ; Milan U.) ; Paccalini, A (LASA, Segrate ; Milan U.) ; Palmisano, A (LASA, Segrate ; Milan U.) ; Pasini, A (LASA, Segrate ; Milan U.) ; Pedrini, D (LASA, Segrate ; Milan U.) ; Prioli, M (LASA, Segrate ; Milan U.) ; Rossi, L (LASA, Segrate ; Milan U.) ; Sorbi, M (LASA, Segrate ; Milan U. ; INFN, Milan) et al.
In agreement with CERN the LASA laboratory of INFN (National Institute for Nuclear Physics) of Milan has carried out the industrial development of a novel type of magnet, for the High Order (HO) correctors of the High Luminosity - LHC (HL-LHC) project. These corrector magnets are based on a superferric design and will be installed in the new HL-LHC insertion regions for the ATLAS and CMS Experiments at CERN. [...]
2022 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4004905
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4004905

Details des Eintrags - Ähnliche Datensätze
2023-05-25
06:15
Flux Concentrator Optimization for Future Positron Sources / Bajas, H (CERN) ; Doebert, S (CERN) ; Latina, A (CERN) ; Zhao, Y (CERN)
Future lepton colliders, such as CLIC, FCC-ee or ILC require high quality positron sources. Positrons are created after the collision of electrons on a tungsten target and then focused to match the aperture of the capture structures with a flux concentrator (FC) often called an Adiabatic Matching Device (AMD), a strong pulsed magnet. [...]
2022 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 32 (2022) 0601105
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.0601105

Details des Eintrags - Ähnliche Datensätze
2023-05-23
09:38
Modélisation et simulation en boucle fermée des systèmes Beam Wire Scanner du CERN à moteur haute performance basé sur la commande vectorielle par FPGA / Yersin, Arnaud
A Beam Wire Scanner (BWS) instrument for particle accelerators in the framework of the LHC Injectors Upgrade (LIU) has been developed by the European Organization for Nuclear Research (CERN) [...]
CERN-THESIS-2023-052 - 122 p.


Details des Eintrags - Ähnliche Datensätze
2023-05-08
16:01
Linac-PSB injection line steering / Sherwood, T R
CERN-MPS-LIN-Tech-Note-72-14; MPS-LIN-Tech-Note-72-14.- Geneva : CERN, 1972 - 2 p. Fulltext: PDF;

Details des Eintrags - Ähnliche Datensätze