2019-10-22
06:18 |
Ultra-high vacuum characterization of molybdenum-carbide graphite for HL-LHC collimators
/ Accettura, Carlotta (CERN ; Milan, Polytech.) ; Beghi, Marco (Milan, Polytech.) ; Bertarelli, Alessandro (CERN) ; Bregliozzi, Giuseppe (CERN) ; Cattenoz, Gregory (CERN) ; Guardia Valenzuela, Jorge (U. Zaragoza (main) ; CERN) ; Redaelli, Stefano (CERN) ; Taborelli, Mauro (CERN) ; Carra, Federico (CERN)
In view of the High-Luminosity upgrade of the Large Hadron Collider (LHC) collimation system, a family of novel molybdenum-carbide graphite (MoGr) composites was developed to meet the challenging requirements of HL-LHC beam-halo collimation, in particular the electrical conductivity and thermo-mechanical performances. The Ultra-High Vacuum (UHV) behaviour of this material was extensively characterized to assess its compatibility with the accelerator’s specifications. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS093
Preprint: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS093
|
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Mechanical robustness of HL-LHC collimator designs
/ Carra, Federico (CERN) ; Bertarelli, Alessandro (CERN) ; Gobbi, Giorgia (CERN) ; Guardia-Valenzuela, Jorge (CERN ; U. Zaragoza (main)) ; Guinchard, Michael (CERN) ; Harden, Fiona (CERN) ; Pasquali, Michele (CERN) ; Redaelli, Stefano (CERN) ; Skordis, Eleftherios (CERN)
Two new absorbing materials were developed as collimator inserts to fulfil the requirements of HL-LHC higher brightness beams: molybdenum-carbide graphite (MoGr) and copper-diamond (CuCD). These materials were tested under intense beam impacts at CERN HiRadMat facility in 2015, when full jaw prototypes were irradiated. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS091
Preprint: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS091
|
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Transverse beam dynamics studies with high intensity LHC beams in the SPS
/ Carlà, Michele (CERN) ; Bartosik, Hannes (CERN) ; Beck, Mario (CERN) ; Carver, Lee (CERN ; U. Liverpool (main)) ; Kain, Verena (CERN) ; Kotzian, Gerd (CERN) ; Li, Kevin (CERN) ; Rumolo, Giovanni (CERN) ; Zannini, Carlo (CERN)
In order to reach the target beam parameters of the LHC injectors upgrade (LIU), about twice the presently operational intensity of LHC type beams has to be achieved. Although the planned upgrade of the main RF system will occur during the long shutdown, a series of measurements have been performed to assess the beam dynamics challenges with these very high intensity beams on the long SPS injection plateau. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS089
Fulltext from publisher: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS089
|
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Status of the CLEAR electron beam user facility at CERN
/ Sjobak, Kyrre (Oslo U. ; CERN) ; Adli, Erik (Oslo U.) ; Bergamaschi, Michele (CERN) ; Burger, Stephane (CERN) ; Corsini, Roberto (CERN) ; Curcio, Alessandro (CERN) ; Curt, Stephane (CERN) ; Döbert, Steffen (CERN) ; Farabolini, Wilfrid (CERN) ; Gamba, Davide (CERN) et al.
The CERN Linear Electron Accelerator for Research (CLEAR) has now finished its second year of operation, providing a testbed for new accelerator technologies and a versatile radiation source. Hosting a varied experimental program, this beamline provides a flexible test facility for users both internal and external to CERN, as well as being an excellent accelerator physics training ground. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS054
Fulltext from publisher: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS054
|
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Transverse emittance studies at extraction of the CERN PS Booster
/ Antoniou, Fanouria (CERN) ; Albright, Simon (CERN) ; Asvesta, Foteini (CERN) ; Bartosik, Hannes (CERN) ; Di Giovanni, Gian Piero (CERN) ; Forte, Vincenzo (CERN) ; Fraser, Matthew (CERN) ; Valdivieso, Ana (CERN) ; Huschauer, Alexander (CERN) ; Mikulec, Bettina (CERN) et al.
Transverse emittance discrepancy in the beam transfer between the Proton Synchrotron Booster (PSB) and the Proton Synchrotron (PS) is observed in operational conditions for the LHC beams at CERN. The ongoing LHC Injectors Upgrade (LIU) project requires a tight budget for beam degradation along the injector chain and therefore the reason for this emittance discrepancy needs to be understood. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS087
Fulltext from publisher: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS087
|
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Identification and compensation of betatronic resonances in the Proton Synchrotron Booster at 160 MeV
/ Santamaría García, Andrea (CERN) ; Albright, Simon (CERN) ; Antoniou, Fanouria (CERN) ; Asvesta, Foteini (CERN ; Natl. Tech. U., Athens) ; Bartosik, Hannes (CERN) ; Di Giovanni, Gian Piero (CERN) ; Mikulec, Bettina (CERN) ; Rafique, Haroon (CERN)
The Proton Synchrotron Booster (PSB) is the first circular accelerator in the injector chain to the Large Hadron Collider (LHC) and accelerates protons from 50 MeV to 1.4 GeV. The PSB will need to deliver two times the current brightness after the LHC Injectors Upgrade (LIU) in order to meet the High Luminosity LHC (HL-LHC) beam requirements. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS086
Fulltext from publisher: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS086
|
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Commissioning of a new digital transverse damper system at the PSB
/ Di Giovanni, Gian Piero (CERN) ; Antoniou, Fanouria (CERN) ; Blas, Alfred (CERN) ; Brischetto, Ylenia (CERN) ; Findlay, Alan (CERN) ; Kotzian, Gerd (CERN) ; Mikulec, Bettina (CERN) ; Sterbini, Guido (CERN)
At the CERN Proton Synchrotron Booster, PSB, an analog transverse damper system has been in operation since 1999, providing satisfactory operational results with the proton beam supplied by Linac2. As a consequence of the LHC Injectors Upgrade, the PSB will face new challenges imposed by higher intensity, injection and extraction energy. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS085
Fulltext from publisher: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS085
|
Úplný záznam - Podobné záznamy
|
2019-10-22
06:18 |
Status of ESS linac upgrade studies for ESSnuSB
/ Gålnander, Björn (ESS, Lund) ; Collins, Max (Lund U. (main)) ; Eshraqi, Mohammad (ESS, Lund) ; Farricker, Aaron (CERN) ; Martins, Carlos (ESS, Lund) ; Miyamoto, Ryoichi (ESS, Lund)
The European Spallation Source (ESS), currently under construction in Lund, Sweden, is the world's most powerful neutron spallation source, with an average power of 5 MW at 2.0 GeV. In the ESS neutrino Super Beam Project (ESSnuSB) it is proposed to utilise this powerful accelerator as a proton driver for a neutrino beam that will be sent to a large underground Cherenkov detector in Garpenberg, mid-Sweden. [...]
2019 - 4 p.
- Published in : 10.18429/JACoW-IPAC2019-MOPTS082
Fulltext from publisher: PDF;
In : 10th International Particle Accelerator Conference, Melbourne, Australia, 19 - 24 May 2019, pp.MOPTS082
|
Úplný záznam - Podobné záznamy
|
|
|
|